What are the important safe operating rules for hardware processing?

In our lives, we often hear the saying "safety first, prevention first", which shows that safety has become a very important social topic. Safety depends on the joint efforts of the community, safety also depends on their own prediction and prevention of danger, with perfect preparation, in order to prevent problems before they happen, no matter what we are doing, what we are going to do, we must understand that safety is the top priority. So what are the important safety operating rules to pay attention to when carrying out hardware processing in Shenzhen? Let's find out.

1. Safe operation rules before entering hardware processing

When performing hardware processing, the operator should maintain a correct posture and have sufficient spirit. In the operation must be concentrated, it is strictly forbidden to talk, cooperate with each other, the operator must not operate in a state of irritability and fatigue, in order to personal safety, avoid accidents, and ensure the safety of operation. Before entering the workplace, all employees should check whether their clothing meets the work requirements, do not wear slippers, high heels and clothing that affects safety, and remember to wear a hard hat if they have long hair.

2, hardware processing work before the need to check the safety operation rules

Before mechanical work, check whether the moving part is filled with lubricating oil, and then start and check whether the clutch and brake are normal, and run the machine empty for 1-3 minutes. When there is a mechanical fault, it is strictly prohibited to operate

3, hardware processing work need to pay attention to the safety operation rules

In mechanical work, it is forbidden to reach the hand into the slider working area, and it is forbidden to take or release the work parts by hand; When taking and releasing the parts in the die, you must use the tools that meet the standard. If the machine has abnormal sound or the machine fails, the power switch should be turned off immediately for inspection. After the machine is started, one person shall transport the material and operate the machine. Others shall not press the electric building or step on the foot switch board. For the safety of others, hands shall not be placed in the mechanical working area or touch the moving part of the machine with their hands.

4, start the machinery need to pay attention to the safety operation rules

It is necessary to wait for all other personnel to leave the mechanical work area and take away the debris on the work table before starting the power supply to start the machine.

5. Pay attention to the safe operation rules when replacing the mold

When replacing the mold, first turn off the power supply, and start to install and debug the mold after the press motion department stops running. After the installation and adjustment is completed, the flywheel is moved by hand to test twice. In order to avoid unnecessary collision between the machinery and the product to be processed, the upper and lower molds must be checked whether they are symmetrical and reasonable, whether the screws are firm, and whether the holder ring is in a reasonable position.